Prevent intruders - including cats, dogs or people - from entering your property with these tough, versatile Stegastrip anti climb spikes.

Stegastrip spikes are actually made from rugged, weather-resistant, UV stabilised polypropylene plastic that’s flexible, allowing the strips to be contoured to fit various fences, walls and gateways. The spikes are designed to look threatening and cause a high level of discomfort without causing any harm which is why they work to keep both people and animals from climbing over them.

Size 

Each strip of spikes is 50cm long (approximately 18 inches) with a base width of 5cm (around 2 inches) and a spike height of 6cm (approximately 2.4 inches). The versatile, flexible strips can be fixed to both straight, flat surfaces along with contoured surfaces such as curved gateways. This 6 metre Stegastrip pack consists of 12 x 50cm strips which will cover a length or around 19.6 feet.

Stegastrip Installation

Stegastrip anti climb spikes can be easily installed by a person with basic DIY skills and a few simple tools. Typically, strips are attached using screws via the pre-drilled fixing holes. But in situations where screws are not suitable the spiked strips can be firmly glued into position using an appropriate adhesive.

Stegastrip is manufactured in the UK from strengthened, UV stabilised polypropylene which allows the strips to be cut to size using a sharp knife or fine toothed saw.  

Size / Dimensions

Length:                  Each strip is 50cm long (half a metre - approx. 18 inches)
Base Width:           5cm (2 inches) with pre drilled fixing holes
Max Width:           13cm (5 inches) - spike tip to spike tip
Height:                  6.0cm (2.4 inches)

Stegastrip is supplied in a choice of pack sizes. For example, to cover a length of 6 metre you will need 12 Stegastrips which requires a pack of 10 plus a pack of 2.

Safety – As for other forms of aggressive or spiked anti climb barriers, installing Stegastrip at a height below head height is not recommended.

Warning Signs – To satisfy the requirements of the Occupiers Liability Act and regional safety requirements - appropriate, high visibility warning signs should be displayed wherever Stegastrip is installed.  (Note: Warning signs are not normally required for domestic installations except in areas where Stegastrip is installed on a boundary wall, fence, gateway etc., bordering onto a public thoroughfare, or common, public land.)

The essence of legislation regarding anti climb barriers generally requires the presence of any potentially hazardous materials or obstacles to be clearly identified to persons (lawfully or unlawfully in the area) who may come into contact with them. The prominent presentation of appropriate warning signage fulfils these requirements.